Izolace na klíč 775 654 443

Why walls get damp

A damp wall always looks much the same, but it has several possible causes and each needs something different. They can largely be told apart without instruments, from where the damp sits, when it gets worse and what comes with it. Here is how to form a view before you start calling.

Five routes water takes into masonry

1. Rising damp

Water from the subsoil climbs the capillaries of the masonry, because there is no working horizontal barrier between wall and foundation, or the original one has failed. It shows as a damp band growing upwards from the floor with a fairly sharp upper edge. Just below it there are usually white salt deposits and the plaster crumbles in that band. The behaviour changes only slightly through the year.

2. Lateral ingress of ground moisture

Water enters the wall from the side, from the soil adjoining the external wall. Typical in cellars and in houses on a slope. The damp does not sit at floor level but at the level of the ground outside, and on a cellar wall it tends to cover the whole area. It gets worse after rain and after a thaw.

3. Water under pressure

Once the groundwater table rises above floor level, it stops being damp and becomes water that pushes. It shows by returning even after drying and by standing in the lowest spots. The state varies with the groundwater level, so even between years. This is the case where ordinary methods will not do on their own and the design belongs to an engineer.

4. Condensation

Moisture from inside settles on the coldest surface. It does not come from outside and has nothing to do with the masonry as a source. It shows by being worst in corners, behind furniture and at windows, by getting worse during the heating season, and by being accompanied by mould. In an unventilated cellar, condensation is the most common cause of all, and the place where injection is most often offered.

5. Leaks and bursts

A fault in the structure or in the services. The damp is local and has a clear pattern in time: after rain, or conversely constant and unrelated to weather when a pipe is leaking. The most common sources are a blocked or leaking downpipe, missing flashing, a damaged sill, and a path falling towards the house instead of away from it.

How to tell the causes apart

You can get surprisingly far without instruments by noticing three things:

  • Where the damp is. Up from the floor, at the level of the ground outside, or in corners?
  • When it gets worse. After rain, during the heating season, or always the same?
  • What comes with it. Salt efflorescence points to water passing through the masonry over a long time. Mould without efflorescence points more to condensation.

Be aware that two causes at once is the rule rather than the exception. A house can be rising damp and condensing at the same time, and if only one is addressed, the owner is left feeling the work did not take.

What to do before you call anyone

  1. Walk around the house. Where the downpipes go, which way the ground and the path fall.
  2. Photograph the wall inside and out, with something that gives a sense of height.
  3. Note when the damp is at its worst and how long it has been like that.
  4. Find out what has already been done to the house and when. Previous work changes the brief.

With that in hand you will get a better quote and more easily tell a contractor who asks questions from one who offers a method straight away. The signpost of causes and methods is in the table on the home page, and the individual methods on Rising damp treatment.

Tell us where it is damp

A few sentences are enough. We read every enquiry, fill in the missing details with you and pass it to a company that does damp proofing in your area. If we have nobody there, we say so straight away instead of leaving you waiting.

Prefer to call? 775 654 443

Only the e-mail is required. Add a phone number if you would rather sort the details out by phone.